AUCTORES
Globalize your Research
Review Article | DOI: https://doi.org/10.31579/2688-7517/073
Department of Pharmacy, Forman Christian College University Lahore, Pakistan.
*Corresponding Author: Saman Ali, Department of Pharmacy, Forman Christian College University Lahore, Pakistan.
Citation: Ali S., Daud U. Rehman, Ejaz A., (2023), Nanoparticles, Precision Engineering for Synthesis of Tailored Dosage Form, J. Addiction Research and Adolescent Behaviour, 6(2) DOI:10.31579/2688-7517/073
Copyright: © 2023, Theofilidis Antonis. This is an open-access article distributed under the terms of The Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Received: 22 May 2023 | Accepted: 09 June 2023 | Published: 16 June 2023
Keywords: nanoparticles; drug delivery system; nanotechnology
This review shows the most current approaches which are being used in the procurement, diagnosis, and therapeutics of multiple diseases parallel with inarguable barriers. NPs are progressing and has extended to multiple types for targeted drug delivery in recent years and act as a game changer in the modern medicines. With clinical uses ranging from contrast agents in imaging to carriers for medication and gene delivery into tumors, NMs have become crucial players in contemporary medicine. In some cases, nanoparticles (NPs) allow for tests and treatments that would not be possible without them. On the other hand, NPs also pose special environmental and societal problems, particularly in terms of toxicity. Therefore, clinical applications of NPs need to be reviewed, and a thorough comprehension of NP effects from the pathophysiologic basis of a disease may lead to more advanced diagnostic options, more productive therapeutics, and more effective preventative aspects. On the other hand, a list of methodologies has been discussed which are being employment for the formulation of these NPs which have affected and improved their physical and chemical characteristics.
NPs- Nanoparticles
MSM- Mesoporous silica material
CVD- chemical vapor deposition
CNTs- carbon nano tubes
For several years, there has been considerable research interest in the domain of drug delivery using particulate delivery systems such as nanoparticles. Nanoparticles are primarily indicated when improving drug molecules' pharmacokinetic and pharmacodynamic properties is desirable. Nanoparticles are the fundamental units of nanotechnology. They can be defined as solid particles or particulate dispersions ranging from 10-1000nm. One can produce nanoparticles, nanospheres, or Nano capsules depending on the preparation technique. Nanospheres systems allow the drug to be physically and uniformly distributed in the matrix. In contrast, Nano capsules are systems in which the drug is contained in a cavity and enclosed by a unique polymer membrane.
They are microscopic particles with unique physical and chemical properties like Lower melting points, very large surface area, specific optical properties, mechanical strength, and specific magnetization. [2] Due to their unique properties, they are the most demanding in many fields like medicine, electronics, energy, and environmental remediation. For example, in medicine, they are used to deliver drugs at a specific site in the body.
But due to their very minute size, there are some potential hazards related to nanoparticles, as they can penetrate the cell membrane and interact with biological systems unexpectedly [2]. Nanoparticles offer unique advantages over conventional drug forms. The benefits of utilizing nanoparticles as potential drug delivery systems can be summarized below:
Despite these advantages, Nano-particles still have some drawbacks. Their small size promotes particle-particle aggregation, making them difficult to handle in liquid or dry form. Being tiny also means there is only limited drug loading and release.
Researchers must address these issues and limitations before nanoparticles can truly replace conventional drug forms. Research is ongoing to identify further health and environmental risks and use nanoparticles safely and effectively. The present review details the introduction of the nanoparticle drug delivery system and the latest developments, types, and potential applications of nanoparticles.
Nanoparticles are classified into various types on the basis of their various properties. Some of them are
2.1. Exosomes.
Exosomes are biological, spherical, lipophilic, bilayer vesicles. They are considered a type of nanoparticle due to their small size. Their size is very small, ranging from 40nm to 100nm [4]. Due to their unique properties, they are used as a vehicle to deliver drugs and other therapeutic agents. They are biocompatible and are used for targeted drug delivery to a specific cell or tissue. They are lipophilic in nature and can cross biological barriers like Blood Brain Barrier, so they are used in neurological diseases. They are used for targeted drug delivery in diseases like cancer. [5] They are used to deliver those drugs to the target via multiple pathways that are deactivated or degraded when administered alone [6]. They have low immunogenicity and can be modified to target specific cells or tissues, which reduces the potential for off-target effects.
The drug is loaded into the particle and is delivered to the target site. The drug is loaded via multiple techniques, including Active loading and passive loading. In Passive loading, the drug is incorporated into the particle via the diffusion method. This method has limitations and poor drug-loading capability. This method is not suitable for all types of drugs. As they are lipophilic in nature, so only drugs that are lipid soluble in nature can be incorporated via the Passive loading technique.
2.2. Liposomes:
Liposomes are drug vesicles that are based on phospholipids with diameters ranging from 0.5 to 5.0μm [7]. They have the ability to form multiple bilayers resulting in an enclosed central aqueous compartment. Liposomes are being widely investigated ad delivery vehicles for imaging agents, proteins, and molecular drugs. They have a high success rate in the domains of food and cosmetics
Liposomes range from 30nm to several micrometers, with the bilayer being approximately 4-5 nm thick. Liposomes are excellent drug delivery systems due to numerous reasons.
They protect the encapsulated drug from physiological degradation and help to extend the half-life of the drug. In addition, liposomes enable researchers to control the release of drug molecules. Perhaps the biggest advantage of liposomes is that they allow for passive and active targeted drug delivery, drastically reducing the systemic side effects by increasing the threshold for maximum-tolerated dose and improving the therapeutic effect [8].
Despite numerous perks, only 14 types of liposomal products are available on the market. This is due to the several limitations these drug delivery systems pose. Liposomes are not suitable carriers for drugs with high molecular weight and solubility. Furthermore, liposomes are highly unstable under mechanical stress and high temperature, which can lead to drug leaking and degradation. Lastly, liposomes are considerably expensive dosage forms and can elicit an immune response, leading to a greater side effect profile. researchers need to address these limitations before liposomes can be used to a greater extent.
2.3. Metallic Nanoparticles:
Metallic nanoparticles (NPs) are tiny metallic particles ranging from 1-100 nanometers. They comprise various metallic elements such as gold, silver, iron, and platinum. Metallic NPs have shown tremendous potential for drug delivery and imaging in medicine.
These particles have benefits as potential drug delivery systems. They offer a large surface area to volume ratio, drastically increasing drug absorption. In addition, they can be conjugated with various ligands like peptides or antibodies for targeted drug delivery to the site of action. Furthermore, metallic NPs exhibit excellent optical properties, which researchers can exploit for imaging applications.
Gold nanoparticles can enhance the contrast of X-ray CT and MRI scans. Metallic nanoparticles also have antimicrobial and anticancer properties. [9] Despite their numerous perks, they still have limitations preventing them from being commercialized readily [10]. The biggest concern regarding metallic nanoparticles is their potential for causing toxicity. research shows that metallic NPs can accumulate in various body organs and exhibit toxicity and inflammation. These particles can also agglomerate and degrade over time, reducing efficacy. these limitations need to be addressed before metallic NPs can be commercialized.
2.4. Polymeric Nanoparticles
Polymeric particles are Nano-scale particles with diameters ranging from 10-1000nm, made from either synthetic or natural polymers. These particles have gained immense traction for their potential application as drug delivery systems and imaging aids [11].
Polymeric nanoparticles offer several advantages over conventional drug delivery systems. These particles offer sustained drug delivery, extending the therapeutic effect of various drugs. In addition, polymeric nanoparticles protect drug molecules from premature degradation by increasing their solubility, resulting in improved bioavailability.
These nanoparticles can also reduce drug toxicity and side effects by limiting drug exposure to healthy tissues. Lastly, these nanoparticles are highly versatile and diverse. They can be readily modified with numerous functional groups enabling them to be used in drug delivery, medical imaging, and food technology.
Despite numerous benefits, these particles have their fair share of disadvantages. Polymeric nanoparticles are prone to aggregation and degradation under mechanical stress, reducing their long-term efficacy. Furthermore, these particles are unsuitable for high drug doses because they have limited loading capacity. These issues need to be addressed before they can be commercialized readily.
2.5. Dendrimers
Dendrimers are highly-branched and symmetric macromolecules on the nanoscale. they have highly specialized, three-dimensional structures that consist of an inner and outer shell with surface functionalities and applications in medical imaging and drug delivery.
Dendrimers have a high success rate in drug delivery and medical diagnosis. They can encapsulate and release drug molecules in a controlled manner, and their surface can be conjugated with various chemical moieties to achieve targeted drug delivery. In addition, dendrimers are highly biocompatible and easily eliminated from the body. They also have low toxicity potential and immunogenicity, making them ideal diagnostic and therapeutic tools. Lastly, Dendrimers can be labeled with various imaging agents making them useful in MRI and fluorescence imaging. [12]
Despite several benefits, they have numerous disadvantages that prevent their commercialization. Dendrimers use complex and time-consuming processes, dramatically driving their costs. Despite the potential for low toxicity, several dendrimers are extremely toxic. Therefore, careful selection of these particles needs to be done.
2.6. Nano emulsions
Nano emulsions are colloidal dispersions of droplets in the 10 to 100-nanometre range. These droplets are stabilized with the use of surfactants. Nano emulsions have garnered tremendous attention over the past few years due to their applications in drug delivery and cosmetics.
They offer several benefits over conventional drug delivery systems. Nano emulsions can be designed to release drugs slowly and sustainably, leading to sustained drug plasma concentration and extended therapeutic effect [13].
In addition, Nano emulsions can increase the ability of drug molecules to traverse biological membranes, decreasing the required doses and increasing therapeutic efficacy. furthermore, these emulsions have improved stability due to smaller droplet size and greater surface area to volume ratio, which can lead to extended shelf life and improved drug bioavailability.
Lastly, Nano emulsions can improve the texture and overall look of drugs, making them more appealing to patients.
Despite many benefits, Nano emulsions have several limitations. These systems require high energy output during manufacturing, which can result in difficulty scaling the procedure. This drastically drives up the cost, making these drug delivery systems rare [14].
Numerous surfactants used to stabilize Nano emulsions exhibit a high degree of toxicity. Therefore, they should be analyzed carefully before incorporation. Perhaps the biggest hurdle in their commercialization is the lack of extensive research into Nano emulsions' long-term safety and efficacy. These limitations need to be dealt with before Nano emulsions can be readily commercialized.
2.7. Ethosomes
Ethosomes are lipid based vesicular carriers, made up of phospholipid, water, and alcohol and sometime glycol [15]. The phospholipid is made up of a hydrophobic head and two hydrophilic chains, due to which they are used to incorporate a large and diverse group of drugs. They are the modified form of liposomes and are often used in transdermal and topical preparations [16].
The alcohol in it acts as preservative and provide stability and protection to the drug from degradation. Alcohol also enhances the permeability of lipid bilayer so the drug is absorbed easily through the lipid bilayer.
The advantages of using Ethosomes in the drug delivery system are [17],
They are being studied for the treatment of skin disease like skin cancer, acne, and psoriasis. They have also been used in the cosmetic products like skin lightening and anti-aging formulations [18].
2.8. Mesoporous Silica Materials
Mesoporous silica materials are the ordered porous silica materials, with pore size ranging from 2-50nm, pore volume ca 1cm3 g-1, high surface area and chemical and thermal stability [19]. They are majorly composed of silica but can incorporate other materials like metals, organic molecules and polymers. Due to their ordered, homogenous porous structure, they are used as a carrier for various types of drugs, such as small molecules, proteins, peptides, nucleic acids. They are used for targeted drug delivery and due to their ordered, tunable structure, they provide controlled release of the drug thus enhance the therapeutic efficacy of the drug and reduce the toxicity [20].
They are used for the treatment of cancer, infectious disease, and different bone disease. They are biocompatible and biodegradable agents. They are converted into their metabolites which can easily be excreted via urine [21]. They protect the drug from premature release, so they are much beneficial for the drugs with shorter half-life.
MSM can revolutionize the drug delivery system. Research is needed to optimize the design and functionalization of these materials.
Nanoparticles are synthesized by using various techniques. These techniques are classified into two types.
These methods are used widely to produce nanoparticles [22].
3.1. Top-down method
In top-down method larger particles i.e., bulk material is converted into smaller particles using different techniques such as
These are the common methods which are used to convert bulk material into powder which is further processed to make nanoparticles. The diagram shows the Top-down approach of synthesis of nanoparticles,
3.2. Bottom-up method
In the bottom-up method of nanoparticle synthesis, the small particles (atoms) are combined to form large particles (Clusters), which are further combined to form nanoparticles. Different techniques are used to combine the small particles into larger ones.
These are the techniques that are used to convert atoms into nanoparticles. The following chart shows the bottom-up approach of nanoparticle synthesis.
3.2.1. Sol-Gel method
It is the method of conversion of sol into the gel using chemical reactions. This method is commonly used to prepare metal oxide nanoparticles. These are the steps involved in this method.
Metal salts or organic material are dissolved into the appropriate solvent. The solution formed contain compounds which act as a precursor of the nanoparticles.
Water or hydrolyzing agent is added to the sol which cause the breakdown of the precursor molecule and a gel network is formed.
The hydrolyzed product undergoes condensation and small particles combine to form larger nanoparticles. Also, in this process water or other products are removed.
The resulting network is allowed to ripen for a period. This process enhances the structural properties of the particle such as crystalline nature and uniformity.
The gel is dried using different techniques, such as freeze drying.
The product formed is subjected to high temperature to remove any organic material present in it. This process promotes particle growth.
This method is economically feasible and controlled control over particle size and shape. These properties make it suitable for both laboratory and industry [23]
3.2.2. Electrochemical deposition
The Electrochemical deposition method is used to synthesize metallic nanoparticles. In this method, an electric current is passed through the electrolyte, and the metal ions are deposited on the cathode surface. Steps involved in this method are,
Metallic salts are dissolved in an appropriate solvent, and the electrolyte is prepared.
Cathode and anode are dipped into the electrolyte and a power source is connected to it.
Electric current is passed through the electrodes, and metal ions start depositing on the cathode. The nanoparticles are collected from the cathode surface.
This method is rapid, and no chemical reductant or oxidant is required. This method gives controlled size and shape of the product [24]. Also, there is absence of undesirable by products so this method is feasible for laboratories and industries.
3.2.3. The Hydrothermal method
This is the bottom-up approach to nanoparticle synthesis. In this method, the nanoparticle is prepared in the aqueous environment under high temperature and pressure [25]. Steps involved in this method are:
The precursor solution is formed by dissolving metal salts or other chemical precursors in the solvent (which is mostly water) in which the precursor is readily soluble.
The reaction mixture is sealed in the pressurized vessel. The vessel is heated in the hydrothermal reactor. The reaction can take place under high temperatures and pressure in an aqueous environment. As the reaction proceeds, nucleation occurs which results in the formation of nanoparticles.
After the reaction time is completed, the vessel is allowed to cool at room temperature, resulting in stable nanoparticles.
The particles are further collected from the reaction mixture via different processes like centrifugation, filtration or precipitation. They are further purified to remove impurities.
It is an environmentally friendly method as water is used as a solvent. Also, this method provides precise control over particle size and shape.
3.3.4. Chemical Vapor Deposition
In Chemical vapor Deposition (CVD), precursor gases essential to nanoparticle production are chosen. A reactor offers a regulated environment with a reaction chamber, heating element, and substrate. The breakdown or reaction of the precursor gas is triggered by heating the chamber. The gases adsorb on the heated substrate after diffusing there. Surface reactions create nucleation centers, and they develop into nanoparticles through processes including diffusion and coalescence. Precursor gases are eliminated when the required size and shape are attained, leaving nanoparticles on the substrate for collection. CVD has been successfully employed in nanoparticle production, such as synthesizing large-area graphene by chemical vapor deposition (CVD) of methane on Cu foils.[26]
The method consists of the following steps:
This step involves choosing the appropriate gases containing the required elements or compounds for nanoparticle formation. The properties of newly formed nanoparticles depend upon the type of precursor gas used. Hence using various precursor gases can result in nanoparticles with distinct properties. [26]
In this step, the operator creates a controlled environment within the reactor which consists of a reaction chamber, a heating element, and the substrate. This enables the manipulation and modification of reaction conditions.
This step involves increasing the reactor temperature to enable the decomposition of precursor gases. Controlled temperature and decomposition ensure that desired reaction kinetics is achieved and undesirable side reactions are prevented. CVD is also employed in the synthesis of carbon nanotubes (CNTs). This step of heating and activating the reaction chamber is crucial. Therefore, the flow rate of hydrocarbon gases as well as the temperature should be accurately controlled so the precursors can be decomposed to provide reactive hydrocarbon for CNTs formation. [28]
Now, the precursor gases are allowed to flow into the reaction chamber and interact with a heated substrate. This enables them to diffuse and adhere to the substrate surface through the process of adsorption. Temperature, pressure, and substrate properties heavily influence this step.
Once the precursor gases have adsorbed onto the surface of the substrate, they undergo several chemical reactions, which lead to the formation of nucleation centers. These nucleation centers are the building blocks of nanoparticle growth and synthesis, and they involve precursor decomposition and liberation of reactive species. [29]
The deposition of further precursor gases onto the nucleation centers' surfaces causes them to keep expanding. The mechanisms through which this growth can take place include surface diffusion, coalescence, and aggregation. The growth process can be influenced by variables like temperature, gas composition, and reaction time.
Once the nanoparticles of the desired size and morphology are synthesized, the precursor gases are removed from the reaction chamber. This is accomplished by cutting off the gas flow and cooling the reactor.
The synthesized nanoparticles tend to stick and remain attached to the substrate surface after the precursor gases are removed. They can be harvested from the substrate and further characterized to be used in various applications.
These actions describe the whole procedure of Chemical Vapour Deposition (CVD) for the creation of nanoparticles. To optimize the characteristics of the resultant nanoparticles, researchers can adjust certain parameters throughout each stage [30].
3.2.5. Pyrolysis
It involves the decomposition of precursor gases at high temperatures in the absence of oxygen. This allows for the production of nanoparticles with controlled size and morphology.
In this process, a precursor material is dispersed in a suitable solvent or carrier gas which is then heated to the point when the precursor material starts decomposing, resulting in the formation of reactive species. These reactive species nucleate further and grow into nanoparticles.
Researchers can control the parameters to achieve nanoparticles of the desired shape and composition. These parameters are:
Pyrolysis offers several advantages over conventional methods for synthesizing nanoparticles, including scalability, greater versatility in precursor selection, and the ability to produce nanoparticles in various forms such as colloidal suspensions or powders [31].
However, it also has several challenges related to obtaining nanoparticles of uniform size or particle size distribution. Therefore, researchers should carefully outweigh the pros against the cons before employing it in nanoparticle synthesis.
3.2.6. Spinning
The spinning method involves nanoparticle synthesis through the rapid solidification of a liquid precursor by employing centrifugal force. This method is commonly used to produce metal and metal oxide nanoparticles.
In this method, a precursor suspension or solution is mounted on a rapidly rotating disc, and as the disc rotates, the centrifugal force induces a thinning effect on the liquid precursor. The rapid evaporation of solvent from the precursor results in the synthesis of nanoparticles.
The parameters that can influence the nanoparticle size, morphology, or composition include:
The spinning method is primarily preferred because it is simple, scalable, and has the ability to produce nanoparticles with uniform size distribution and high surface area. It can be used to synthesize nanoparticles of metals, metal oxides, and hybrid materials. Spinning is often utilized to synthesize magnesium hydroxide nanoparticles in a spinning disk reactor and then use them as precursors for preparing magnesium oxide [32].
Although spinning offers numerous benefits, it also comes with its fair share of challenges, including unwanted nanoparticle agglomeration and difficulty in achieving precise control over nanoparticle size or shape. Researchers should carefully consider the advantages and disadvantages of this method prior to employing it in nanoparticle synthesis.
The studies showed that the nanoparticles, with small size and large surface area have a great ability to deliver the drug with more bioavailability as compared to the conventional dosage forms. Still there are compatibility issues with drug or with human body, but studies are ongoing to overcome these issues. Targeted drug delivery using nanotechnology is more effective against the disease with least side effects. No doubt, the nanotechnology has revolutionized the drug delivery system has opened new gates of research and development.
Clearly Auctoresonline and particularly Psychology and Mental Health Care Journal is dedicated to improving health care services for individuals and populations. The editorial boards' ability to efficiently recognize and share the global importance of health literacy with a variety of stakeholders. Auctoresonline publishing platform can be used to facilitate of optimal client-based services and should be added to health care professionals' repertoire of evidence-based health care resources.
Journal of Clinical Cardiology and Cardiovascular Intervention The submission and review process was adequate. However I think that the publication total value should have been enlightened in early fases. Thank you for all.
Journal of Women Health Care and Issues By the present mail, I want to say thank to you and tour colleagues for facilitating my published article. Specially thank you for the peer review process, support from the editorial office. I appreciate positively the quality of your journal.
Journal of Clinical Research and Reports I would be very delighted to submit my testimonial regarding the reviewer board and the editorial office. The reviewer board were accurate and helpful regarding any modifications for my manuscript. And the editorial office were very helpful and supportive in contacting and monitoring with any update and offering help. It was my pleasure to contribute with your promising Journal and I am looking forward for more collaboration.
We would like to thank the Journal of Thoracic Disease and Cardiothoracic Surgery because of the services they provided us for our articles. The peer-review process was done in a very excellent time manner, and the opinions of the reviewers helped us to improve our manuscript further. The editorial office had an outstanding correspondence with us and guided us in many ways. During a hard time of the pandemic that is affecting every one of us tremendously, the editorial office helped us make everything easier for publishing scientific work. Hope for a more scientific relationship with your Journal.
The peer-review process which consisted high quality queries on the paper. I did answer six reviewers’ questions and comments before the paper was accepted. The support from the editorial office is excellent.
Journal of Neuroscience and Neurological Surgery. I had the experience of publishing a research article recently. The whole process was simple from submission to publication. The reviewers made specific and valuable recommendations and corrections that improved the quality of my publication. I strongly recommend this Journal.
Dr. Katarzyna Byczkowska My testimonial covering: "The peer review process is quick and effective. The support from the editorial office is very professional and friendly. Quality of the Clinical Cardiology and Cardiovascular Interventions is scientific and publishes ground-breaking research on cardiology that is useful for other professionals in the field.
Thank you most sincerely, with regard to the support you have given in relation to the reviewing process and the processing of my article entitled "Large Cell Neuroendocrine Carcinoma of The Prostate Gland: A Review and Update" for publication in your esteemed Journal, Journal of Cancer Research and Cellular Therapeutics". The editorial team has been very supportive.
Testimony of Journal of Clinical Otorhinolaryngology: work with your Reviews has been a educational and constructive experience. The editorial office were very helpful and supportive. It was a pleasure to contribute to your Journal.
Dr. Bernard Terkimbi Utoo, I am happy to publish my scientific work in Journal of Women Health Care and Issues (JWHCI). The manuscript submission was seamless and peer review process was top notch. I was amazed that 4 reviewers worked on the manuscript which made it a highly technical, standard and excellent quality paper. I appreciate the format and consideration for the APC as well as the speed of publication. It is my pleasure to continue with this scientific relationship with the esteem JWHCI.
This is an acknowledgment for peer reviewers, editorial board of Journal of Clinical Research and Reports. They show a lot of consideration for us as publishers for our research article “Evaluation of the different factors associated with side effects of COVID-19 vaccination on medical students, Mutah university, Al-Karak, Jordan”, in a very professional and easy way. This journal is one of outstanding medical journal.
Dear Hao Jiang, to Journal of Nutrition and Food Processing We greatly appreciate the efficient, professional and rapid processing of our paper by your team. If there is anything else we should do, please do not hesitate to let us know. On behalf of my co-authors, we would like to express our great appreciation to editor and reviewers.
As an author who has recently published in the journal "Brain and Neurological Disorders". I am delighted to provide a testimonial on the peer review process, editorial office support, and the overall quality of the journal. The peer review process at Brain and Neurological Disorders is rigorous and meticulous, ensuring that only high-quality, evidence-based research is published. The reviewers are experts in their fields, and their comments and suggestions were constructive and helped improve the quality of my manuscript. The review process was timely and efficient, with clear communication from the editorial office at each stage. The support from the editorial office was exceptional throughout the entire process. The editorial staff was responsive, professional, and always willing to help. They provided valuable guidance on formatting, structure, and ethical considerations, making the submission process seamless. Moreover, they kept me informed about the status of my manuscript and provided timely updates, which made the process less stressful. The journal Brain and Neurological Disorders is of the highest quality, with a strong focus on publishing cutting-edge research in the field of neurology. The articles published in this journal are well-researched, rigorously peer-reviewed, and written by experts in the field. The journal maintains high standards, ensuring that readers are provided with the most up-to-date and reliable information on brain and neurological disorders. In conclusion, I had a wonderful experience publishing in Brain and Neurological Disorders. The peer review process was thorough, the editorial office provided exceptional support, and the journal's quality is second to none. I would highly recommend this journal to any researcher working in the field of neurology and brain disorders.
Dear Agrippa Hilda, Journal of Neuroscience and Neurological Surgery, Editorial Coordinator, I trust this message finds you well. I want to extend my appreciation for considering my article for publication in your esteemed journal. I am pleased to provide a testimonial regarding the peer review process and the support received from your editorial office. The peer review process for my paper was carried out in a highly professional and thorough manner. The feedback and comments provided by the authors were constructive and very useful in improving the quality of the manuscript. This rigorous assessment process undoubtedly contributes to the high standards maintained by your journal.
International Journal of Clinical Case Reports and Reviews. I strongly recommend to consider submitting your work to this high-quality journal. The support and availability of the Editorial staff is outstanding and the review process was both efficient and rigorous.
Thank you very much for publishing my Research Article titled “Comparing Treatment Outcome Of Allergic Rhinitis Patients After Using Fluticasone Nasal Spray And Nasal Douching" in the Journal of Clinical Otorhinolaryngology. As Medical Professionals we are immensely benefited from study of various informative Articles and Papers published in this high quality Journal. I look forward to enriching my knowledge by regular study of the Journal and contribute my future work in the field of ENT through the Journal for use by the medical fraternity. The support from the Editorial office was excellent and very prompt. I also welcome the comments received from the readers of my Research Article.
Dear Erica Kelsey, Editorial Coordinator of Cancer Research and Cellular Therapeutics Our team is very satisfied with the processing of our paper by your journal. That was fast, efficient, rigorous, but without unnecessary complications. We appreciated the very short time between the submission of the paper and its publication on line on your site.
I am very glad to say that the peer review process is very successful and fast and support from the Editorial Office. Therefore, I would like to continue our scientific relationship for a long time. And I especially thank you for your kindly attention towards my article. Have a good day!
"We recently published an article entitled “Influence of beta-Cyclodextrins upon the Degradation of Carbofuran Derivatives under Alkaline Conditions" in the Journal of “Pesticides and Biofertilizers” to show that the cyclodextrins protect the carbamates increasing their half-life time in the presence of basic conditions This will be very helpful to understand carbofuran behaviour in the analytical, agro-environmental and food areas. We greatly appreciated the interaction with the editor and the editorial team; we were particularly well accompanied during the course of the revision process, since all various steps towards publication were short and without delay".
I would like to express my gratitude towards you process of article review and submission. I found this to be very fair and expedient. Your follow up has been excellent. I have many publications in national and international journal and your process has been one of the best so far. Keep up the great work.
We are grateful for this opportunity to provide a glowing recommendation to the Journal of Psychiatry and Psychotherapy. We found that the editorial team were very supportive, helpful, kept us abreast of timelines and over all very professional in nature. The peer review process was rigorous, efficient and constructive that really enhanced our article submission. The experience with this journal remains one of our best ever and we look forward to providing future submissions in the near future.
I am very pleased to serve as EBM of the journal, I hope many years of my experience in stem cells can help the journal from one way or another. As we know, stem cells hold great potential for regenerative medicine, which are mostly used to promote the repair response of diseased, dysfunctional or injured tissue using stem cells or their derivatives. I think Stem Cell Research and Therapeutics International is a great platform to publish and share the understanding towards the biology and translational or clinical application of stem cells.
I would like to give my testimony in the support I have got by the peer review process and to support the editorial office where they were of asset to support young author like me to be encouraged to publish their work in your respected journal and globalize and share knowledge across the globe. I really give my great gratitude to your journal and the peer review including the editorial office.
I am delighted to publish our manuscript entitled "A Perspective on Cocaine Induced Stroke - Its Mechanisms and Management" in the Journal of Neuroscience and Neurological Surgery. The peer review process, support from the editorial office, and quality of the journal are excellent. The manuscripts published are of high quality and of excellent scientific value. I recommend this journal very much to colleagues.
Dr.Tania Muñoz, My experience as researcher and author of a review article in The Journal Clinical Cardiology and Interventions has been very enriching and stimulating. The editorial team is excellent, performs its work with absolute responsibility and delivery. They are proactive, dynamic and receptive to all proposals. Supporting at all times the vast universe of authors who choose them as an option for publication. The team of review specialists, members of the editorial board, are brilliant professionals, with remarkable performance in medical research and scientific methodology. Together they form a frontline team that consolidates the JCCI as a magnificent option for the publication and review of high-level medical articles and broad collective interest. I am honored to be able to share my review article and open to receive all your comments.
“The peer review process of JPMHC is quick and effective. Authors are benefited by good and professional reviewers with huge experience in the field of psychology and mental health. The support from the editorial office is very professional. People to contact to are friendly and happy to help and assist any query authors might have. Quality of the Journal is scientific and publishes ground-breaking research on mental health that is useful for other professionals in the field”.
Dear editorial department: On behalf of our team, I hereby certify the reliability and superiority of the International Journal of Clinical Case Reports and Reviews in the peer review process, editorial support, and journal quality. Firstly, the peer review process of the International Journal of Clinical Case Reports and Reviews is rigorous, fair, transparent, fast, and of high quality. The editorial department invites experts from relevant fields as anonymous reviewers to review all submitted manuscripts. These experts have rich academic backgrounds and experience, and can accurately evaluate the academic quality, originality, and suitability of manuscripts. The editorial department is committed to ensuring the rigor of the peer review process, while also making every effort to ensure a fast review cycle to meet the needs of authors and the academic community. Secondly, the editorial team of the International Journal of Clinical Case Reports and Reviews is composed of a group of senior scholars and professionals with rich experience and professional knowledge in related fields. The editorial department is committed to assisting authors in improving their manuscripts, ensuring their academic accuracy, clarity, and completeness. Editors actively collaborate with authors, providing useful suggestions and feedback to promote the improvement and development of the manuscript. We believe that the support of the editorial department is one of the key factors in ensuring the quality of the journal. Finally, the International Journal of Clinical Case Reports and Reviews is renowned for its high- quality articles and strict academic standards. The editorial department is committed to publishing innovative and academically valuable research results to promote the development and progress of related fields. The International Journal of Clinical Case Reports and Reviews is reasonably priced and ensures excellent service and quality ratio, allowing authors to obtain high-level academic publishing opportunities in an affordable manner. I hereby solemnly declare that the International Journal of Clinical Case Reports and Reviews has a high level of credibility and superiority in terms of peer review process, editorial support, reasonable fees, and journal quality. Sincerely, Rui Tao.
Clinical Cardiology and Cardiovascular Interventions I testity the covering of the peer review process, support from the editorial office, and quality of the journal.
Clinical Cardiology and Cardiovascular Interventions, we deeply appreciate the interest shown in our work and its publication. It has been a true pleasure to collaborate with you. The peer review process, as well as the support provided by the editorial office, have been exceptional, and the quality of the journal is very high, which was a determining factor in our decision to publish with you.
The peer reviewers process is quick and effective, the supports from editorial office is excellent, the quality of journal is high. I would like to collabroate with Internatioanl journal of Clinical Case Reports and Reviews journal clinically in the future time.
Clinical Cardiology and Cardiovascular Interventions, I would like to express my sincerest gratitude for the trust placed in our team for the publication in your journal. It has been a true pleasure to collaborate with you on this project. I am pleased to inform you that both the peer review process and the attention from the editorial coordination have been excellent. Your team has worked with dedication and professionalism to ensure that your publication meets the highest standards of quality. We are confident that this collaboration will result in mutual success, and we are eager to see the fruits of this shared effort.
Dear Dr. Jessica Magne, Editorial Coordinator 0f Clinical Cardiology and Cardiovascular Interventions, I hope this message finds you well. I want to express my utmost gratitude for your excellent work and for the dedication and speed in the publication process of my article titled "Navigating Innovation: Qualitative Insights on Using Technology for Health Education in Acute Coronary Syndrome Patients." I am very satisfied with the peer review process, the support from the editorial office, and the quality of the journal. I hope we can maintain our scientific relationship in the long term.
Dear Monica Gissare, - Editorial Coordinator of Nutrition and Food Processing. ¨My testimony with you is truly professional, with a positive response regarding the follow-up of the article and its review, you took into account my qualities and the importance of the topic¨.
Dear Dr. Jessica Magne, Editorial Coordinator 0f Clinical Cardiology and Cardiovascular Interventions, The review process for the article “The Handling of Anti-aggregants and Anticoagulants in the Oncologic Heart Patient Submitted to Surgery” was extremely rigorous and detailed. From the initial submission to the final acceptance, the editorial team at the “Journal of Clinical Cardiology and Cardiovascular Interventions” demonstrated a high level of professionalism and dedication. The reviewers provided constructive and detailed feedback, which was essential for improving the quality of our work. Communication was always clear and efficient, ensuring that all our questions were promptly addressed. The quality of the “Journal of Clinical Cardiology and Cardiovascular Interventions” is undeniable. It is a peer-reviewed, open-access publication dedicated exclusively to disseminating high-quality research in the field of clinical cardiology and cardiovascular interventions. The journal's impact factor is currently under evaluation, and it is indexed in reputable databases, which further reinforces its credibility and relevance in the scientific field. I highly recommend this journal to researchers looking for a reputable platform to publish their studies.
Dear Editorial Coordinator of the Journal of Nutrition and Food Processing! "I would like to thank the Journal of Nutrition and Food Processing for including and publishing my article. The peer review process was very quick, movement and precise. The Editorial Board has done an extremely conscientious job with much help, valuable comments and advices. I find the journal very valuable from a professional point of view, thank you very much for allowing me to be part of it and I would like to participate in the future!”
Dealing with The Journal of Neurology and Neurological Surgery was very smooth and comprehensive. The office staff took time to address my needs and the response from editors and the office was prompt and fair. I certainly hope to publish with this journal again.Their professionalism is apparent and more than satisfactory. Susan Weiner
My Testimonial Covering as fellowing: Lin-Show Chin. The peer reviewers process is quick and effective, the supports from editorial office is excellent, the quality of journal is high. I would like to collabroate with Internatioanl journal of Clinical Case Reports and Reviews.
My experience publishing in Psychology and Mental Health Care was exceptional. The peer review process was rigorous and constructive, with reviewers providing valuable insights that helped enhance the quality of our work. The editorial team was highly supportive and responsive, making the submission process smooth and efficient. The journal's commitment to high standards and academic rigor makes it a respected platform for quality research. I am grateful for the opportunity to publish in such a reputable journal.
My experience publishing in International Journal of Clinical Case Reports and Reviews was exceptional. I Come forth to Provide a Testimonial Covering the Peer Review Process and the editorial office for the Professional and Impartial Evaluation of the Manuscript.
